2016.07.30

Introduction Nowadays, economic development makes people more and more unable to leave the cold storage. The constant temperature storage of products is inseparable from the cold storage. For the use of the cold storage, the most important thing is maintenance. The correct maintenance method can improve the service life of the cold storage, so how to do it? 1. Goods that have not been frozen are not allowed to enter the freezing room of frozen goods to ensure the quality of the goods and prevent damage to the cold storage. 2. Keep the surface of the cold storage equipment clean and hygienic at all times, so that it is not easy to rust, so that it can be durable, and do not develop sloppy habits and cause unnecessary losses. Be sure to clean the condenser frequently, because the surface of the condenser in the cold storage is too dirty and it is easy to cause refrigeration
图片名称

2016.07.15

To manufacture a medical cold storage, we need to know the following four parts: cold storage engineering technical parameters 1. Temperature range (℃): vaccine warehouse; 0*8 can be used to store vaccines, pharmaceuticals, etc. Drug warehouse: 2*8 is used to store drugs and biological products, etc. Blood bank: 5*1 can be used to store blood, pharmaceutical biological products, etc. Low temperature insulation library: -20*-30 to preserve plasma, biological materials, vaccines, reagents, etc. Cryopreservation bank: -30*-80 can be used to preserve placenta, semen, stem cells, plasma, bone marrow, biological samples, etc. 2. Cold storage board configuration: cold storage board size specifications: the standardized board width is
图片名称

2016.07.15

How to solve the phenomenon that the temperature of the cold storage cannot be lowered? This is a common phenomenon in the cold storage industry. Here is an analysis of why this situation occurs: the six reasons why the temperature of the cold storage does not drop and the temperature drops slowly 1. The frost on the evaporator surface is too thick or the dust accumulates too much, and the heat transfer effect is reduced. Another important reason for the slow drop of the storage temperature is the low heat transfer efficiency of the evaporator, which is mainly due to the thick frost layer or excessive dust accumulation on the evaporator surface. caused by many. Since the surface temperature of the evaporator in the cold storage is mostly lower than 0 °C, and the humidity in the warehouse is relatively high, the moisture in the air is easily frosted or even frozen on the surface of the evaporator, affecting the evaporator.
图片名称

2016.07.13

In the hot summer, when the air conditioner is turned on, it is instantly cool. However, some diseases also invade your body with the cold wind, causing dry tongue, dizziness, weakness of limbs, etc., the most serious of which is "air conditioning legs". The reason for the formation of "air-conditioned legs" is that, working, studying and living in a low-temperature air-conditioned room for too long, the knee joint is stimulated by cold, which leads to synovitis, bursitis and cold spasm of leg muscles, or vasoconstriction, tissue hypoxia, which in turn causes "synovitis". Women, in particular, like to wear short skirts and shorts, and their exposed knees are more likely to be stimulated by cold, causing "air-conditioned legs" disease. hot summer then we
图片名称

2016.05.19

1. Thermal insulation performance of cold storage insulation materials: The first requirement of polyurethane thermal insulation materials is thermal insulation performance, and the quality of thermal insulation performance cannot be observed with the naked eye before it is actually put into use. too late. Through a large number of experimental tests, we hope to achieve this goal: ① Use structural amine ethers to reduce thermal conductivity and improve thermal insulation effect; ② Try to reduce the water content in various raw materials and formulas to avoid the deterioration of thermal insulation performance caused by water foaming; ③ Main material polyether: the products of large factories that have undergone strict post-treatment are selected. Compared with the polyethers of small factories without post-treatment, the foam cells are uniform.
图片名称

2016.05.10

The hot summer is coming, and ice cream, ice cream and other heat-relieving artifacts have been launched one after another. As refrigerated and frozen snacks in snack foods, cold drink products are not only different from other snack foods in terms of transportation and storage conditions, but also in terms of market supply. Recently, some media reported that the sales period of ice cream, ice cream and other cold beverage products in Changzhou market has been advanced to March. The sales staff said that with the weather getting warmer, the sales volume has increased significantly, "Now the single-day sales volume can increase by about 10% compared with the previous month, and the product lines of many brands have been opened, and the sales volume has continued to increase. "According to professional reports, the global
图片名称

2016.04.21

Seafood cold storage is simply the use of cold storage to store seafood products and aquatic products, etc. Because the temperature required for seafood storage is low, the general temperature should be below -23 degrees Celsius, so seafood cold storage can also be called seafood freezer, seafood quick-freezer Etc., low temperature helps to maintain the original quality and flavor of seafood, and at the same time can greatly extend the fresh-keeping time of seafood, generally speaking, it can prolong the fresh-keeping time for about 3 to 6 months. Characteristics of seafood cold storage 1. The distribution range is mainly in the eastern coastal areas of my country, such as Guangdong, Shanghai, Fujian, Shandong, Hebei, etc. The seafood production in these places is reduced, and the demand for seafood preservation equipment is also large.
图片名称

2016.02.20

In the daily use of the business, paying more attention to the maintenance and maintenance of the cold storage can not only prolong the overall service life of the cold storage, but also greatly improve the efficiency ratio of the refrigeration system. Cold storage can be divided into ammonia refrigeration and fluorine refrigeration according to the refrigeration system. If the cold storage with ammonia refrigeration is well maintained, the service life is about 15 years, and the service life of the cold storage with fluorine system is about 20 years. Some problems often encountered by cold storage installation companies: (1) Cold storage presets: There are some preset units and individual preset positions, because there is a little misunderstanding about the awareness of the moisture-proof, air-insulating and thermal insulation layers of the cold storage, starting from the preset. Office principle and exterior of cold storage
图片名称

2015.12.17

The compressor is an indispensable machine in the refrigeration of cold storage, but various problems will be encountered during the use process. The most common one is the frosting of the air return port of the cold storage compressor, so how to deal with this problem? Yanghu Xiaobian recommends a few points for everyone: Frosting at the air return port of a cold storage compressor is a very common phenomenon in the refrigeration system. Under normal conditions, it will not immediately cause a system problem, and fine frosting generally does not need to be dealt with. With some cold storages Changes in working conditions will improve or aggravate the phenomenon. If the frosting phenomenon is serious, then you need to find out the cause of the frosting first. If the return air temperature of the compressor is low, the return air will generally appear at the same time.
图片名称

2015.12.09

Cold storage is mainly used for constant temperature storage refrigerator equipment for food, dairy products, meat, aquatic products, etc. The cold storage is actually a kind of low-temperature cold storage (refrigerator) and also belongs to a kind of refrigeration equipment, with a large refrigeration area. Since it is stored food, it will inevitably have some odors after using it for a long time. Let's take a look at the ways to eliminate odors in the cold storage! 1. Reasons for peculiar smell in the cold storage The peculiar smell in the cold storage refers to: the cooking raw materials and food in the cold storage will produce an abnormal smell through physical and chemical changes under the influence of external factors. Attached to cold storage
图片名称

2015.11.11

In recent years, the cold storage, which should provide an important guarantee for food safety, has become the initiator of many fire scenes. Accidents occur frequently, and in addition to grief, the safety of cold storage has caused deep thinking. So how should the cold storage operate to ensure safety? 1. Safe operation of the valve The valve should not be damaged when the valve is operating, and the valve core, valve stem, handwheel and valve body should be protected to prevent staggered opening and closing. When operating, operate slowly, and pay attention to the sound of the refrigerant flowing, and it is forbidden to open it violently to prevent liquid shock. The valves on the main line from the compressor to the condenser are open. Various spare valves, refrigerant filling valves, drain valves, etc. should be closed at ordinary times.
图片名称

2014.07.22

In summer, the use of cold storage is more common. In the daily use of cold storage, have you paid attention to the maintenance of the cold storage equipment? Basically, the cold storage has been put into use since it is built, and continuous operation will inevitably lead to the aging of the equipment. Therefore, the maintenance of the cold storage equipment should be done well in the daily use of the cold storage. The maintenance of cold storage equipment can not only effectively prolong the service life of related equipment, reduce the operating energy consumption of cold storage, but also effectively avoid sudden failures in the use of cold storage. The maintenance of specific cold storage equipment mainly starts from the following aspects. 1. Are the parameters such as temperature and temperature difference in the cold storage or equipment stable?
图片名称
< 1...678...10 >